Troubleshooting Netgear Orbi Pink Light Issue
Orbi Pink Light

Troubleshooting Netgear Orbi Pink Light Issue

The LEDs on your Netgear Orbi router are supposed to be lit and green. A stable green LED on your Orbi device indicates a good internet connection. But, what if any of the LEDs turn pink? Netgear Orbi pink light issue is something you need to think about. But, you don’t have to worry at all! Trust us and mark our words. In this blog post, we will provide you with various troubleshooting tips to fix the issue. So, let’s start!

Fixed: Netgear Orbi Pink Light Issue

Fix 1: Connect Your Devices Properly

If you want your Netgear Orbi device to work smoothly, then bear in mind – it should be connected properly to your internet modem and satellite.

Apart from this, if you have used a damaged Ethernet cable for making a connection between them, then also you may get the issue. All you need is to ensure that a well-maintained Ethernet cable is used by you and that the cable connection is finger-tight.

Note: It is not suggested to make a wireless connection between your devices. If you do so, then the WiFi signals of your Netgear Orbi router will get interrupted. And, WiFi signal interference is the most common reason behind getting the issue.

Fix 2: Check Your Internet Modem

Netgear Orbi pink light issue can also persist if there is something wrong from your ISP’s end. So, what you have to do – contact your internet service provider. Remain calm and ask him to fix the internet-connectivity issue as soon as possible. By any chance, if you do not find anything wrong on his end, then without thinking much, try the next troubleshooting tip highlighted below.

Fix 3: Update Your Orbi Device

Netgear Orbi pink light issue can also trouble you if the firmware version on it has become outdated. One of the finest ways to fix the issue – update the firmware of your Netgear Orbi router right away. For instructions to update the firmware, visit the web interface of your device using orbilogin.net web address and follow the given instructions in the exact given order.

Note: If you interrupt the firmware update process anyway, then no fix would help you troubleshoot the issue. So, give the firmware update process time to get completed. And, once the process gets completed, your Netgear Orbi router will reboot automatically.

Fix 4: Set Up Your Device Properly

Improper configuration of the device is one of the biggest yet major reasons behind Netgear Orbi pink light issue. For fixing it, reset your Netgear Orbi router. Just press and hold the reset hole on your Netgear router for a few minutes. And, once you are done with the resetting process, reconfigure your router again.

We strictly recommend – if you don’t know how to reset the Orbi device and reconfigure it, contact our customer support team. Our technicians will help you complete the reset and reconfiguration process of your Netgear Orbi router in the blink of an eye.

Fix 5: Relocate Netgear Orbi Router

The bad location of your Netgear device also issue. To deal with it, change the location of your Orbi device. The best and ideal location for your device is the center-most and higher area in your home. And, above all, your Netgear Orbi router will function well if it is placed within reach of your internet modem and satellite.

The Last Words

Our blog on how to troubleshoot the Netgear Orbi pink light issue ends here. Anticipating that the fixes we have mentioned here proved helpful to you. On the off chance that things are still not in your favor, do not hesitate in contacting our expert technical executives.

 

Tagged With:
Disclaimer: orbilogin-net.net is about information and troubleshooting of networking devices. It's team of experts is an independent service provider of networking devices support. Any use of third party trademarks, brand names, products, and services is only for informational and referential purpose. We hereby disclaim any affiliation, sponsorship, or endorsement of any such third party. orbilogin-net.net is a website providing information on troubleshooting and resolving issues related to various routers and similar networking devices.