Can I Perform Macard WiFi Extender Setup with Orbi Router?
Do you have the same question in your mind?Well, the answer is yes. You can connect a Macard WiFi extender with a Netgear Orbi router.The Orbi system creates a mesh network with the help of different Orbi devices. Although you can invest in additional Orbi satellites to extend the network, if you still wish to use a WiFi extender that can be done too. In this guide, we will walk you through the steps on how to perform the MacardWiFi extender setup with your Orbi system.
Before Connecting WiFi Extender with Orbi Router!
Know that you can connect a WiFi extender with your Orbi system, but this will create its own separate network with the new SSID. The devices in the mesh network use “one network name.” by saying that, we mean that all the Orbi devices have the same network name. You can move around the home without getting disconnected as the device keeps getting connected to the nearest satellite.
Now that you’re considering a Macard WiFi extender setup with an Orbi router, you should be aware that the SSID for the extender will not be the same as the Orbi devices. The extender will have its own separate network with a different SSID.
How to Set Up Macard WiFi Extender with Orbi Router?
Since you’ve decided to set up a WiFi extender with the Orbi router, we will help you complete the setup in this section. But first, ensure certain things.
See that you have a stable internet connection and the power supply is adequate. The Orbi router should be working properly and has to be well connected to the internet modem.
Visit the Orbi login page to reach its admin dashboard and check for firmware updates. Have your Orbi running on the recent firmware version to stay away from any issues during the setup.
Now implement the steps that have been discussed below and carry out the extender setup with the Orbi router:
- Bring the Macard extender close to the Orbi router first. As you will need to establish a connection between them, having them sit next to each other is essential.
- Switch off both devices for now if you have them powered on already.
- Putting to use a LAN cable, join the ports on both these devices now.
- It is now time you switch the devices on. Follow this sequence: Orbi router >MacardWiFi extender. Let the devices completely boot up.
- Now, join the extender’s network on a computer or laptop.
- Visit the Macard extender’s IP on a browser once you’ve joined its WiFi network.
- Follow the steps that you find appearing on the screen to complete Macard WiFi extender setup.
Your extender is ready to provide you with an extended network from the Orbi router.
What If Netgear Orbi Can’t Connect to Extender?
If you get stuck during the extender setup then you should try the tips mentioned below:
- The LAN cable joining the extender and Orbi router should be up to mark and non-damaged. The ports in use to make the connection shouldn’t be damaged.
- In case you’re making a wireless connection between the two devices, then you should ensure that you place them close enough such that they can establish a connection.
- Plug in the devices into alternative sockets for the ones that you’re using may be damaged. Be sure of supplying consistent power to the devices.
- Update the browser that you’re using to log in to the WiFi extender.
- Clean the browser’s cache before you log in.
- Disable any antivirus software or firewall temporarily as it may also prevent the login and setup process.
- Try disabling any proxy server if you’re using.
Verdict
Netgear Orbi whole home mesh network is efficient enough to provide you with impeccable internet throughout the home. However, if you need to perform a Macard WiFi extender setup with Orbi router then using the instructions discussed in this guide will be helpful for you.
After you have your extender setup, you should try connecting to its network to check if the setup is successful. Relocate the extender to close to another WiFi dead zone and connect to its extended network.