Orbi RBS50 Setup | Netgear Orbi AC3000 Setup

Eliminate dead network zones throughout your whole home or workplace with the help of Orbi RBS50 setup. It’s time to expand your wireless signal up to 2,500 square feet of area without losing speed and range over large distances.
Now, let’s focus on the procedure to set up a Netgear Orbi AC3000 mesh system.

Netgear Orbi RBS50 Hardware Setup Instructions

As you are well familiar with your Netgear Orbi RBS50 mesh system, let us help you with Orbi hardware setup.

Steps to Configure Your Orbi RBS50 Router
  • First of all, turn off your home modem.
  • Unplug your existing home wireless router.
  • Now, replace your home router with the Orbi RBS50.
  • Power on both your home modem and Orbi router.
  • Wait until the power LED turns into a solid white color.
Steps to Configure Your Orbi RBS50 Satellite
  • Place your Orbi RBS50 satellite to a central location.
  • Plug the power adapter into an electrical power outlet.
  • Wait until the power LED shows the white light.
  • Press the sync button on Orbi satellite and let the sync process take place.
Netgear Orbi RBS50

Call Toll Free for Support: 1-866-889-0666

Orbi RBS50 Setup Methods

After the Netgear Orbi AC3000 mesh system hardware setup, you need to connect to the Orbi’s network for login. You can do this in two ways. They are Orbi wired and wireless setup.

Netgear Orbi AC3000 | RBS50: Wired Setup

Connect your home WiFi router to your Orbi RBS50 with the help of an Ethernet cable and follow the below-mentioned steps:

  • Ensure that your Netgear Orbi RBS50 AC3000 router is receiving the proper power supply.
  • Turn on your computer.
  • Now, try to connect the Orbi RBS50 router to your home wireless router.
  • A confirmation message will pop up on your desktop’s screen, stating that you are connected to the LAN network.
  • So, here you are done with the Orbi RBS50 wired setup.
Orbi RBS50 setup

Netgear Orbi AC3000: Wireless Setup

orbi setup
  • First of all, make sure that both the Orbi router and Orbi satellite are powered up and successfully synced to each other.
  • Turn on your computer and check the wireless networks’ list.
  • Find Orbi RBS50’s network name from the available wireless networks’ list and try to connect to it.
  • Enter the default Orbi login credentials.
  • So, here you have completed the Orbi AC3000 RBS50 wireless setup process.

Stuck somewhere in-between the Orbi setup process? Write to us at support@orbilogin-net.net for instant help.

Netgear Orbi Login | Orbi RBS50 Login

After setting up your Orbi, it’s time to complete the Netgear RBS50 configuration. To do so, you have to simply log into the Orbi AC3000 web interface. Here’s how:

  • Open any of your preferred web browsers on your computer.
  • Visit the Netgear Orbi setup web page.
  • Enter the default Orbi login credentials and hit on the ‘Sign In’ button.
  • You will land on the Orbi admin panel web page.
  • Now, follow the on-screen instructions to set up your Orbi router.
  • Once done, hit on the Save button.
Orbi login

Orbi AC3000 RBS50 Setup Issues

If you are struggling with the following:

Go through the guidelines given below:

  • Try a different web browser.
  • Check if the cables are well connected to the ports.
  • Check the connection between your home modem and Orbi.
  • Use the default Orbi IP address to access the Orbi login web page.
  • Also, clean all the cache, cookies, junk files, and stored history from your web browser.
  • Check if your Orbi AC3000 router and Orbi RBS50 satellite are properly connected to an electrical power outlet.

If you are still struggling with the Netgear Orbi login or setup issues, contact us.

Call Toll Free for Support: 1-866-889-0666

Disclaimer: We hereby disclaim ownership of any product and any association, affiliation or representation in any form, of any brand, product or service. All the information provided here has been drafted by a team of highly qualified technical experts and regularly undergo reviews and updates.