An Absolute Guide to Fix Netgear Orbi SXR30 Magenta Light Issue
More than ninety percent of people across the globe have nothing but good things to say about a Netgear Orbi router. However, the remaining ten percent has been cursing their fate ever since they came across the Netgear Orbi SXR30 magenta light issue. If you too are going nuts because of the same issue, then you are at the right place. Here, we have come up with some hacks through which troubleshooting the Netgear Orbi SXR30 magenta light issue will become a five-finger exercise for you. Thus, get to reading.
Fixed: Netgear Orbi SXR30 Magenta Light Issue
1. Check the Ethernet Connection
If a damaged Ethernet cable is connecting your Netgear Orbi SXR30 router and the existing modem, then it is pretty obvious why you are struggling with the Netgear Orbi SXR30 magenta light issue.
To troubleshoot the issue, it is recommended that you bring a brand new Ethernet cable home to connect your devices. What’s that? Do you have a lazy personality which is not letting you step out of your house? Well, in that case, connect your devices wirelessly.
Note: If you are not a lazy bud and have decided to connect your devices with the help of a new Ethernet cable, ensure that the connection between them is not loose.
2. Pull Your WiFi Devices Closer
While performing Netgear Orbi setup, you might have read in the user manual that it is important for the Orbi router to be in the same room as that of the modem. But, it looks like you just read it and didn’t implement it, otherwise, you wouldn’t be experiencing the Netgear Orbi SXR30 magenta light issue.
To rectify your mistake, consider unplugging your Netgear Orbi router from its existing power socket, and plugging it into the one located near the modem. It’s that simple.
3. Re-Sync Your Netgear Orbi Devices
Another reason behind the Netgear Orbi SXR30 magenta light issue is the improper sync between your Orbi router and the modem.
Therefore, check whether the Sync button has been pressed on your Netgear Orbi router as well as the satellite. If it isn’t, then you need to follow the steps mentioned below:
- Press the Sync button on your Netgear SXR30 Orbi router.
- Do the same on your Orbi satellite.
- Hold on for some time.
Now, check whether the Netgear Orbi SXR30 magenta light issue has said goodbye to you. If not, don’t make the mistake of putting a halt to the 5-minute read.
4. Perform Orbi Firmware Update
Although an outdated firmware is not a primary reason behind the Netgear Orbi SXR30 magenta light issue, it still is a reason. Thus, update your device to its most recent firmware version by using the following steps:
- Gain access to your computer and then open up an internet browser.
Note: Whatever internet browser you opened for use, it is recommended that you update it to its latest version. Doing will prevent you from facing any further technical issues.
- Go to the orbilogin.net or orbilogin.com page.
- Perform Netgear Orbi router using the default login credentials.
- Click Log In.
- Once done, select Settings > Firmware Update.
- Follow the on-screen prompts.
Note: Walk through the on-screen prompts in the same order as they are given. Trust us, you will thank us later for this little tip.
If you find the method of performing Netgear Orbi firmware update manually a little difficult, then it is recommended that you opt for the Orbi application.
Final Thoughts
Coming across the Netgear Orbi SXR30 magenta light issue has ruined the internet-usage experience of a number of users across the globe. If you too are in the same boat, then trust us, there are no better hacks than the ones mentioned above to put into use.
In case, even after following them, you are stuck with the Netgear Orbi SXR30 magenta light issue, take some time out of your busy schedule and contact our experts. They will surely shed light on where you went wrong and help you troubleshoot the issue within a matter of minutes.