March 14, 2023 / Bruce Martin
Orbi Satellite Colors [How to Fix Issues Related to the Status]
Every LED light on the Netgear Orbi satellite has a different meaning when it flashes. In this blog, we have talked about two different Orbi satellite colors, what they mean, and how to fix issues if they depict some. Taking this into consideration, continue reading.
While walking through this blog, if you find yourself unable to understand the meaning of any point, or get stuck with any hack, then it is recommended that you do not think twice before contacting our proficient experts. If you also have any doubts regarding Orbi setup, they will be able to help you regarding the same.
Netgear Orbi Satellite Colors: Fixing Related Issues
1. Orbi Satellite Flashing Red
If the LED light on your Netgear Orbi router is blinking red, then it is because your wireless device is not getting an adequate and uninterrupted power supply from the wall outlet that it is connected to. This might be because the electrical socket in use is damaged. In case, you are using one of the old Orbi models, then it might have come with a power cable. A worn-out power cable can also force the Netgear Orbi satellite color to change to red.
To troubleshoot the issue, it is recommended that you repair the damaged wall socket. In case, you have a power cable in play as well, then ensure that it is not worn out. Did none of these things work for you? Well, in that case, plug the device into another wall socket and use a new power cable to do so.
Now, check if the Orbi satellite colors are anything but red. On the off chance, you are still not able to get rid of the issue at hand; you should waste no more restarting the Netgear Orbi satellite. You can easily give your satellite a new start by turning it off, waiting for some time, and then, turning it back on.
2. Orbi Satellite Pulsing Magenta
If the LED located on your Netgear Orbi satellite pulses magenta for more than one minute, it could be because the satellite lost the connection to the router. Do you know why this might have happened? It can be because of two reasons:
- There is a lot of distance separating the satellite and router.
- The Sync button is not pressed on either of the devices.
If the first situation is true in your case, then consider reducing the distance between the Netgear Orbi router and the satellite, but, not too much. Otherwise, the signals emitted from them will get clashed and you will come across other technical issues in the future.
In case the next situation is what caused the LED on your satellite to pulse magenta, then you should sync your Orbi devices again. Now, you might be wondering how to do so, right? Well, first press the Sync button on the Orbi router, and then, the satellite. Do not forget to hold on for some time after doing so.
How to Avoid Orbi Satellite Colors from Changing?
If you want that the LEDs located on your Netgear Orbi satellite should only be green, then this section discusses some things that you can do to make the impossible become possible:
- Make sure that the Orbi router is kept close to the modem.
- No transmitting appliance or metal object should be kept near the satellite or router.
- Avoid connecting networking devices using a wireless source.
- The Sync button on both Orbi devices should not be broken.
This was all about the different Netgear Orbi satellite colors and what one can do in order to resolve issues in case they change from green to red or magenta. We hope that you found the information given in this blog helpful.
On the off chance, you are still facing LED-related issues with your Orbi satellite, contacting our well-versed experts will surely do you some good. Therefore, it is recommended that you ping them now.
What is that? Are you worried about the time at which contacting them is feasible? Well, there is no ‘right’ time to get in touch with them as regardless of the hour at which you’ll reach out, you will find them ready to assist you with the knowledge that they have.