September 19, 2023 / Bruce Martin

Orbi RBK750 Setup: What You Should Know?

Break free from lagging and unstable internet signals in your home by getting the Netgear Orbi RBK750 setup done at your home. Orbi tri-band WiFi mesh system helps you get strong and reliable WiFi signals in all parts of the home, killing the WiFi dead spots.

Wondering how to get the setup executed? Find the information about the same in this very guide.

How to Set Up Orbi RBK750?

In this section, we have covered step-by-step guidelines to set up the RBK750 WiFi mesh system. Carefully go through each step and perform the setup in a hassle-free manner.

1st Step: Power Down the Modem

Initiate the Orbi setup process by powering off the modem.
Remove its power cable.
If it is battery-charged, then remove the batteries from it.
However, let the internet cable be connected to it.
Let it sit idle for some time now.

2nd Step: Connect RBK750 Router to Modem

Use the Ethernet cable that came with the router to connect the router to the modem.
Connect the LAN port on the modem to the Internet port of the router.
Ensure to make a firm and secure connection.

3rd Step: Switch on Devices

It is now time you switch on the modem.
Next, plug in the router to a wall outlet and turn it on.

4th Step: Sync Orbi Satellite RBS750

You should now connect the Orbi satellite to the main router.
Place the satellite within the range of the router.
Switch it on.
It will automatically detect the Orbi router’s signal and sync to it.

The Orbi light should turn solid blue which means the devices are synced properly. In case the devices do not sync automatically then you should sync them manually.

Move the satellite closer to the router now.
Press the Sync button on the router.
Within two minutes press the Sync button on the satellite.
Observe the light on the satellite.
It should turn blue now.

5th Step: Connect to Network

You now need to connect to the router’s network to further complete the Orbi RBK750 setup process. You can either use the web interface on a PC or use the Orbi app for the further process.

Using Web Interface: Connect your computer/laptop to the Orbi’s network either by using the WiFi or a LAN cable.
Using Mobile App: Connect your phone to Orbi’s WiFi.

Pro Tip: The information about the WiFi network name and password of the Netgear Orbi is available on the label on the Orbi device.

6th Step: Complete the Setup

You have two options to get the setup completed. One is by using a PC and the second one is using a mobile phone.

Orbi RBK750 Setup via Orbi App

Download the Netgear Orbi app on your mobile phone if you haven’t downloaded it yet.
You can download it on your Android or iOS phone using the Play Store or the App Store.
Launch the app as soon as it is installed on your phone.
Execute the setup instructions that appear on the app to complete the setup process.

Orbi RBK750 Setup via Web Interface

Run a search engine on your PC.
An updated search engine will be helpful to avoid any setup issues.
Visit orbilogin.com or orbilogin.net on the browser.
In case none of the above URLs help you load the Orbi setup page, then use the default gateway IP address 192.168.1.1.
You will land on the Orbi Setup page which is also known as the Basic Home screen.
The setup prompts need to be followed as they appear on the screen and you will be done with the Netgear Orbi setup process.

The Final Note

This brings an end to our informative post on how to perform the Netgear Orbi RBK750 setup. Post setup, you can relocate the Orbi router and satellite to new locations in the home. Place them in different parts where you want to get WiFi signals. But you ought to place the router in the modem’s range and the satellite in the router’s range. This is a crucial point that you must remember.