How to Connect Orbi to Cable Router Using Orbi WPS Button?
November 23, 2021 / Maggie Wilson

How to Connect Orbi to Cable Router Using Orbi WPS Button?

If you are looking for a guide to connect your Netgear Orbi to the cable modem router’s WiFi network using the Orbi WPS button, this post is written for you. So, wait no more, scroll down, and continue reading.

Steps to Connect Orbi to Cable Router Using Orbi WPS Button

Mentioned below are the guidelines that you need to follow in order to connect your Netgear Orbi router to the cable modem router’s network using the Orbi WPS button:

  • Plug your Netgear Orbi router into a wall outlet. Make sure that the wall outlet is in good condition.
  • Then, press the Power button on your wireless device.
  • Wait patiently for the power LED light to become solid green.
    Note: Make sure that the cable modem router is receiving enough power supply from the wall outlet.
  • The next step in line is to check the WPS instructions for your WiFi device or PC.
  • Then, carefully press the Sync button on the cable modem router.
    Note: If your cable modem router is placed near electronic devices, metal objects, reflexive surfaces, and transmitting appliances, consider changing its location. Also, avoid placing the router near thick concrete walls.
  • After some time, either press the WPS button on your device or follow the instructions for WPS connections.

In this manner, you’ll be able to connect your Netgear Orbi router to the cable modem router’s network using the Orbi WPS button. If you get stuck at any point during the process, then let us tell you that there are two other ways through which you can connect your Orbi to the cable modem router’s network. They are as follows:

  1. Using an Ethernet cable
  2. Using a wireless source

Steps to Connect Orbi to Cable Router Using Ethernet Cable

Here are the steps that will help you connect your Netgear Orbi router to the cable modem router’s network using an Ethernet cable:

  • Plug your Netgear Orbi router into a wall outlet. Make sure that your wireless device is receiving an adequate power supply from the wall outlet.
  • Once assured, grab an Ethernet cable.
  • Then, connect your WiFi devices using the Ethernet cable. Ensure that it is not worn out or damaged from anywhere.
  • Once your devices successfully get connected, a message will appear on your device notifying you about the same.

By following these steps, you’ll be able to connect Netgear Orbi router to the cable modem router’s network using an Ethernet cable.

Note: If you are unable to connect your Orbi to the cable router’s network, feel free to get in touch with our well-versed technical experts.

Steps to Connect Orbi to Cable Router Network Wirelessly

Here is how to connect your Netgear Orbi to the cable modem router’s network wirelessly:

Note: Make sure that the cable modem router and the satellite are connected properly.

  • Switch on your computer.
  • Find and select the WiFi network.
    Pro Tip: The WiFi network name is the same for the cable modem router and the satellite.
  • Connect the WiFi network.
  • Once done, enter the WiFi password. If you are not certain regarding the WiFi password, have a look at the cable modem router label.

And you are done! In this way, you’ll be able to connect your Netgear Orbi router to the cable modem router’s network wirelessly.

Need More Help?

Although the aforementioned will help you connect your Netgear Orbi router to the cable modem router’s network using the Orbi WPS button, if it doesn’t, you can get in touch with our technical experts at any hour of the day. They have the solution to all your Orbi setup-related doubts and queries.

Tagged With:

Disclaimer: We hereby disclaim ownership of any product and any association, affiliation or representation in any form, of any brand, product or service. All the information provided here has been drafted by a team of highly qualified technical experts and regularly undergo reviews and updates.